EN 10294-1 Grade E355+N Pipe Manufacturers, Suppliers, Stockists & Exporters

The EN 10294-1 E355+N Tube is a high-strength seamless mechanical and structural hollow section steel tube employed in precision-based applications in the automobile, aerospace, oil and gas, and construction sectors. It conforms to the European standard EN 10294-1 and has high mechanical characteristics, dimensional precision, and high toughness.

Table of Content

What are EN 10294-1 Grade E355+N Pipe?
Advantages of EN 10294-1 Grade E355+N Pipe?
Uses and Applications EN 10294-1 Grade E355+N Pipe?
What Are Specification EN 10294-1 Grade E355+N Pipe?
What Are Equivalent EN 10294-1 Grade E355+N Pipe?
Chemical Comp Of EN 10294-1 Grade E355+N Pipe?
Mechanical Properties EN 10294-1 Grade E355+N Pipe?
People Also Search For EN 10294-1 Grade E355+N Pipe?

What are EN 10294-1 Grade E355+N Pipe?

The EN 10294-1 E355+N Steel Tube is a normalized fine-grain seamless steel tube with high machinability and weldability. It possesses a minimum yield strength of 355 MPa and finds application in situations where high endurance and mechanical strength are needed. It can be employed in machining and in hydraulic and pneumatic systems and in high-pressure equipment and in engineering structures.

❝

EN 10294-1 Grade E355+N Pipe, EN 10294-1 Grade E355+N Pipe Manufacturers, EN 10294-1 Grade E355+N Pipe Suppliers, EN 10294-1 Grade E355+N Pipe Stockists, EN 10294-1 Grade E355+N Pipe Exporters

❞

Advantages of EN 10294-1 Grade E355+N Pipe?

High Durability & Strength: The pipes possess high impact strength and tensile strength to resist harsh conditions.
Good Machining Properties: EN 10294-1 E355+N material has good machinability and can be easily machined to be utilized in precision engineering applications.
Good Weldability: The low carbon composition makes weldability easier and enables smooth and strong welds.
Corrosion & Oxidation Resistance: The right surface finishes enable such pipes to resist harsh conditions and extend their lifespan.
Dimensional Accuracy: Made with stringent tolerances, they ensure consistent quality in numerous industrial uses.

Uses and Applications EN 10294-1 Grade E355+N Pipe?

The EN 10294-1 Grade E355+N Tube is used in drilling rigs, pipeline laying, and high-pressure tubing due to its strength and corrosion-resistant attributes.

Aerospace Components: Used in aircraft landing gears and structural frames due to its high tensile strength and reliability.
Automotive Industry: Best suited to shock absorbers, axles and chassis components to withstand tough conditions
Hydraulic cylinders: Used in fluid power systems and high-pressure hydraulic systems due to very good machinability and high strength.
Mechanical Engineering: Used in shafts in machinery, rollers, and precision components where strength and structural integrity are important.
Oil & Gas Industry: Utilized in drilling machinery, pipeline fittings and pressure vessels to withstand harsh environments.
Construction & Infrastructure: Utilized in bridge supports, crane booms, and high-rise buildings to offer higher load-bearing capacity.

❝

EN 10294-1 Grade E355+N Pipe in India, EN 10294-1 Grade E355+N Pipe Manufacturers in India, EN 10294-1 Grade E355+N Pipe Suppliers in India, EN 10294-1 Grade E355+N Pipe Stockists in India, EN 10294-1 Grade E355+N Pipe Exporters in India

❞

EN 10294-1 E355+N Steel Pipes Manufacturers Meta Aerospace is one of the well-known EN 10294-1 Grade E355+N Pipe Suppliers that provides high-performance pipes to be used in industrial applications. Our international standard pipes provide better performance and a longer lifespan.

❝

EN 10294-1 Grade E355+N Pipe in Mumbai, EN 10294-1 Grade E355+N Pipe Manufacturers in Mumbai, EN 10294-1 Grade E355+N Pipe Suppliers in Mumbai, EN 10294-1 Grade E355+N Pipe Stockists in Mumbai, EN 10294-1 Grade E355+N Pipe Exporters in Mumbai

❞

Being one of the most trusted EN 10294-1 Grade E355+N Pipe Suppliers, we provide precision engineered seamless pipes with high strength and machinability. We supply to many industries with assured delivery and supply in a guaranteed time frame.

EN 10294-1 E355+N Steel Tube Suppliers We deal in EN 10294-1 Grade E355+N Pipe Stockists with massive inventory to fulfill immediate bulk requirements. We have in stock different dimensions and thicknesses to cater to several application requirements. EN 10294-1 E355+N Pipe Exporters Meta Aerospace is one of the prominent EN 10294-1 Grade E355+N Pipe Exporters providing high-performance pipes to global markets. Our pipes undergo tests to ensure they are strong and up to international standards in quality.

What Are Specification EN 10294-1 Grade E355+N Pipe?

EN 10294-1 Grade E355+N Carbon Steel Square bar size	4 to 100mm
EN 10294-1 Grade E355+N Carbon Steel Hollow Bar	32mm OD x 16mm ID to 250mm OD x 200mm ID)
Carbon Steel EN 10294-1 E355+N Hex Bar size	2-100mm A/F
Carbon Steel EN 10294-1 E355+N Angle bar size	3mm20mm20mm~12mm100mm100mm
EN 10294-1 Grade E355+N Carbon Steel Rectangles Size	33 x 30mm to 295 x 1066mm
Carbon Steel EN 10294-1 E355+N Flat bar size	Thickness: 2 -100mm
Carbon Steel EN 10294-1 E355+N Flat bar size	Width: 10 to 500mm
EN 10294-1 Grade E355+N Channel Bar	80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness
EN 10294-1 Grade E355+N Carbon Steel Section	3.0 to 12.0mm thickness
Carbon Steel EN 10294-1 E355+N Round bar size	Diameter: 3-~800mm
EN 10294-1 Gr E355+N Billet Size	1/2" to 495mm Diameter
CS EN 10294-1 Grade E355+N Surface	Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline
EN 10294-1 Grade E355+N Carbon Steel Tolerance	H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Carbon Steel EN 10294-1 E355+N Technique	EN 10294-1 Gr E355+N Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod
Carbon Steel EN 10294-1 Grade E355+N Condition	Hardened & tempered, annealed
Finish	Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
Form	Grade 38Mn6 Carbon Steel Round, Rod, T-Bar, Nickel Alloy Channel Bar, Precision Ground Bar, Nickel Alloy Flat Bar, Nickel Alloy Square Bar, Nickel Alloy Blocks, Nickel Alloy Round Rod, Nickel Alloy Rings, Nickel Alloy Hollow, Nickel Alloy Triangle, Rectangle, Hex (A/F), Nickel Alloy Threaded, Half Round Bar, Profiles, Nickel Alloy Billet, Nickel Alloy Ingot, I/H Bar, Forging etc.
Processing	Bar cutting to 650mm
Our Carbon EN 10294-1 Grade E355+N Steel Round bar conforms to NACE MR0175/ISO 15156

Equivalent material Of EN 10294-1 Grade E355+N Pipe?

DIN	EN	BS	NFA	ASTM	ASME
–	EN 10294-1 Grade E355+N	–	–	–	–

Chemical Composition Of EN 10294-1 Grade E355+N Pipe?

Carbon	Silicon	Manganese	Phosphorous	Sulphur	Molybdenum	Nickel	Chromium	Copper	Others
max 0.22	max 0.50	max 1.50	0.045	0.05	max 0.08	max 0.40	max 0.30	max 0.30	V max 0.10

Mechanical Properties Of EN 10294-1 Grade E355+N Pipe?

Yield Strength		Tensile Strength			Elongation A5 min
MPa min	ksi min	MPa min	MPa min	ksi min	Percentage
		490	–	–	20

People Also Search

EN 10294-1 Grade E355+N Pipe price, EN 10294-1 Grade E355+N Pipe equivalent, EN 10294-1 Grade E355+N Pipe chemical composition, EN 10294-1 Grade E355+N Pipe mechanical properties, EN 10294-1 Grade E355+N Pipe dimensions, EN 10294-1 Grade E355+N Pipe hardness, EN 10294-1 Grade E355+N Pipe tolerance, EN 10294-1 Grade E355+N Pipe density, EN 10294-1 Grade E355+N Pipe specification, EN 10294-1 Grade E355+N Pipe applications, EN 10294-1 Grade E355+N seamless pipe, EN 10294-1 Grade E355+N Pipe tensile strength, EN 10294-1 Grade E355+N Pipe welding, EN 10294-1 Grade E355+N Pipe heat treatment, EN 10294-1 Grade E355+N Pipe suppliers in India, EN 10294-1 Grade E355+N Pipe weight chart, EN 10294-1 Grade E355+N Pipe standard, EN 10294-1 Grade E355+N Pipe stock, EN 10294-1 Grade E355+N Pipe exporter in UAE, EN 10294-1 Grade E355+N Pipe manufacturer in USA, EN 10294-1 Grade E355+N Pipe hardness chart, EN 10294-1 Grade E355+N Pipe sizes, EN 10294-1 Grade E355+N Pipe tolerance table, EN 10294-1 Grade E355+N Pipe EN standard, EN 10294-1 Grade E355+N Pipe cold drawn, EN 10294-1 Grade E355+N Pipe hot rolled, EN 10294-1 Grade E355+N Pipe equivalent grades, EN 10294-1 Grade E355+N Pipe European standard, EN 10294-1 Grade E355+N Pipe yield strength, EN 10294-1 Grade E355+N Pipe material composition, EN 10294-1 Grade E355+N Pipe distributor, EN 10294-1 Grade E355+N Pipe exporter in Saudi Arabia